Skip to content

Accuracy, speed and reliability

Our standards are high so that you can feel confident your project is given the attention it deserves.

Foil, emboss and die cutting
17presses
From hand-fed clamshells to large format Bobst presses.
Largest sheet
63" × 43"
Extra large format die cutting on our Standard 43x63.
Folding and gluing
B&R Moll
Plus a Vega folder/gluer, with inline tipping and labeling.
Quality system
ISO 9001:2015
Certified and audited, from light stocks to heavy board.View certificate

Presses and Gluers

Accuracy, speed and reliability. All dimensions are width × height in inches.

Operator working at a Bobst press

Large Format Presses

Foil Master 104 (1)

  • Foil Stamping
  • Embossing
Minimum Sheet Size
13.75" x 15.75"
Maximum Sheet Size
40.94" x 29.13"
Tonnage
~300 tons

Excels at:

  • High volume runs
  • Full coverage foil jobs requiring high tonnage
  • Multi-level and Sculpted Embossing

Bobst BMA 102 (4 total)

Heated Chase BMA 102 (2)

  • Foil Stamping
  • Embossing
Minimum Sheet Size
13.75" x 15.75"
Maximum Sheet Size
40" x 28"
Tonnage
~250 tons

Excels at:

  • Small and large coverage foil jobs
  • Multi-level and Sculpted Embossing

Bobst BMA 102 (4 total)

Nonheated Chase BMA 102 (2)

  • Die Cutting
  • Embossing
Minimum Sheet Size
13.75" x 15.75"
Maximum Sheet Size
40" x 28"
Tonnage
~250 tons

Excels at:

  • Standard, single level emboss
  • Reliable performance on common cutting jobs

Bobst 106 (Novacut/Comercial) (2)

  • Die Cutting
  • Internal Stripping
Minimum Sheet Size
13.75" x 15.75"
Maximum Sheet Size
41.75" x 29.125"
Tonnage
~286 tons

Excels at:

  • Reducing manual handling and increasing efficiency for jobs requiring internal stripping of sombrero holes, punched holes, and other knockouts
  • Precision Cutting and high-volume production runs
  • *Nickless Die Cutting

*Larkin Exclusive: Learn more here.

SBL-1050 SE (1)

  • Die Cutting
  • Internal Stripping
Minimum Sheet Size
14.50" x 15.75"
Maximum Sheet Size
41.375" x 29.50"
Tonnage
~300 tons

Excels at:

  • Repeat cutting work and high production runs.
  • Reducing manual handling and increasing efficiency for jobs requiring internal stripping of sombrero holes, punched holes, and other knockouts
  • *Nickless Die Cutting

*Larkin Exclusive: Learn more here.

Medium to Small Format Presses

Gietz FSA 790 (1)

  • Die Cutting
  • Foil Stamping
  • Embossing
Minimum Sheet Size
8.25" x 12"
Maximum Sheet Size
28" x 21"

Excels at:

  • High Precision cutting and foiling
  • Jobs using thin stock (.004"-.007")
  • Foil stamping on stock conventially difficult to foil stamp on due to dwell feature

Kluge EHD 14x22 (4)

  • Die Cutting
  • Foil Stamping
  • Embossing
Minimum Sheet Size
5" x 4"
Maximum Sheet Size
23.50" x 17"
Max Foil Stamp Area
22" x 14"

Excels at:

  • Small format jobs including: business cards, envelopes, custom note cards
  • Flexibility: all 4 presses have diecutting capability, 3 of 4 presses have foil/emboss capability
  • *Nickless Die Cutting

*Larkin Exclusive: Learn more here.

Hand Fed Clamshell Presses

Standard/Brause (3 total press, 1 foilstamp and embossing press)

  • Die Cutting
  • Thermal Kiss Cutting
  • Foil Stamping
  • Embossing
Minimum Sheet Size
N/A
Maximum Sheet Size
44" x 32"

Excels at:

  • Low quantity runs.
  • Foil stamping precut products that automatic machines would not be able to feed.
  • Kiss cutting adhesive backed vinyl or sticker paper.
  • Foil stamping and die cutting shapes in prebound book covers.
  • Foil stamping on stock conventially difficult to foil stamp on due to dwell feature.
  • Cutting plastic or rubber medical products.

Standard 43x63 (1)

  • Die Cutting
Minimum Sheet Size
N/A
Maximum Sheet Size
63" x 43"

Excels at:

  • Extra large format sheets that do not fit on our standard presses including lare P.O.P. displays, medical packaging (such as catheter packaging), corrugated boxes, peg board backers.
  • Cutting thick plastic (60PT) and corrugated material.

Folding and Gluing

B&R Moll Equipment and Vega Folder/Gluer

Fold/Glue:

  • Roll folds
  • Double gate fold
  • Autobottom boxes
  • Sideseam boxes

Inline services:

  • Tipping/affixing
  • Label application
  • Wafer Seal application
  • Strip Tape application
  • Inkjetting
  • Read & write camera verification (part numbers/addresses)

Post Press Fulfillment

Yoko Offline Blankers (2)

Offline blankers provide a high speed solution to removing finished pieces from the waste material after sheets have been die cut.

  • Reduced manual labor, leading to efficient turn times.
  • Produces uniform blanks with minimal risk of damage to final piece.
  • Can handle intricate blank shapes and multi-up forms.

Fulfillment Team

Post press team dedicated to quality assurance and sending product back to you the way you need it, including:

  • Shrink wrapped parts in quantity specified
  • Labeled boxes
  • Skids/gaylords
  • Drop shipping to the destination you need

Stocks and specialty materials

We run everything from delicate light stocks to heavier board. Share your material early and we will confirm how it will run.

Light and delicate stocks

In-line stripping clears waste on materials that would tear on a hand strip.

Heavier weight stocks

Our folders and gluers hold clean glue lines on cartons and heavier board.

Translucent and specialty stocks

Tonal finishes and foil on sheets chosen for how they look and feel.

Lenticular materials

Lenticular mounted sheets can be cut nickless. Talk to estimating about your project.

Feed belts and pressure wheels on a folder-gluer

Built for the jobs other shops turn away

Dedicated foil equipment means foil work never waits behind cutting. In-line stripping protects delicate stocks. Our folders and gluers handle heavier weights with clean glue lines.

Every job is run by people with decades on these machines.

Certifications and memberships

  • ISO 9001:2015: Quality management certified
  • Sustainable Forestry Initiative: Member
  • IADD: International Association of Diecutting & Diemaking
  • FSEA: Foil & Specialty Effects Association
  • Printing Industry Midwest: Member

Have a job that needs to stand out?

Send us the details and our estimating team will come back with an honest, accurate quote.

Part of the DFC family of manufacturing companies

DFC Manufacturing Group is your one-stop source for tooling and specialty converting — steel rule dies, rotary dies, thermoform trim dies, laser emboss, foil stamping and converting services across the United States.

DFC Manufacturing Group